 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
|
|
|
|
|
|
 |
|||||||
HTE NoWire-HRX Digital Data Receiver The HTE NoWire-HRX Digital Data Receiver is used to receive the signals transmitted by the NoWire-HTX Wireless Data Repeaters positioned around your facility. The NoWire-HRX Digital Data Receiver completes the wireless link between the NoWire-TX Wireless Data Transmitters and your data processing firmware. Furnished in a very compact package, the Digital Data Receiver can be installed anywhere near your central data collection site. For best results, the receiving antenna should be mounted outside if possible, and as high off the ground as is practical.
General Specifications (subject to change without notice)
Operating Voltage: 7 VDC to 30 VDC Current Consumption: TBD Receiver Type: 27 MHz Band, crystal stabilized superheterodyne Receiver Sensitivity: -102 dBm typical Receiver Spurious Response: -70 dB typical worst case Data Output: RS-232/422/485 compatible Temperature Range: 0°C to +70°C Dimensions: TBD Weight: TBD |
|||||||
Click here to download spec sheet |
|||||||
Home | Single Board Computers | InCircuit Emulators | Wireless | Software |
|||||||