Specs

Specifications:

New High-speed Architecture

4 clocks/machine cycle (8032=12).
Wasted cycles removed.
Runs DC to 33MHz clock rates.
Single-cycle instruction in 160ns.
Uses less power for equivalent work.
Dual data pointer.
Optional variable lenght MOVX to access fast/slow RAM peripherals.

NEW High intergration controller includes:

Power-fail reset.
Programmable Watchdog timer.
Early-warning power-fail interrupt

NEW 13 total interrupt sources with six external

Memory
OEM Board:

Two JEDEC 28 pin sockets accommodate 32K bytes each.
Accepts EPROM (2764, 27128, or 27256) or equivalent EEPROM, and Static RAM (6264 or 62256).
2 programmable (GAL decoded)

Development Board:

ROM - Debug/Monitor
RAM - 32K bytes

Interface
OEM Board:

Two, on-chip serial ports.

One RS-232 Serial.
One Asynchronous TTL level serial port

Parallel I/O, 8+ lines, and two external interrupts.

Development Board:

Third serial port, RS-232

Electrical
OEM Board:

Requires +5 volt power supply for normal operation.

Development Board:

On-board 5 volt regulator
U.L. wall mount power supply.

Environmental
Storage temperature range from 25 to 100 degrees Celsius.
Operating temperature range 0 to 55 degrees Celsius.
Dimensions
6.0 inches by 3.5 inches, 0.55 inches high.
40-pin Expansion Connector!
A solder-side header connector allows you to connect directly to the CPU. This allows for a daughterborad with as much I/O as needed.

Software Support
Debug code using:

On-board ROM monitor allows the user to download hex files into program RAM
Single step, trace, disassemble and execute commands, simplify debugging
Optional software simulator for 8051
Optional DryICE In-Circuit Emulator